Ellisys USB Explorer 260 - Technical Data
Specifications
Analyzer Characteristics
- Supported specifications: USB 1.0, 1.1, 2.0, OTG and IC-USB (designed
for USB 3.0)
- Supported link speeds: 1.5, 12 and 480 Mbit/s with automatic discovery
(designed for up to 5 Gbps)
- Timestamp accuracy: 16.67 ns precision
- Low-level errors: detection of bit-stuffing, CRC-5 and CRC-16 errors
- Bus states: detection and measurement of Reset, Suspend, Keep Alive and
High-Speed Handshake states
Generator Characteristics
- Supported specifications: USB 1.0, 1.1, 2.0, OTG and IC-USB (ready for
USB 3.0)
- Supported link speeds: 1.5, 12 and 480 Mbit/s
- Supported modes: host, device and inline error injection
- Timing accuracy: 16.67 ns precision
InterChip USB Probe Characteristics (sold separately)
- Supported speeds: 1.5, 12 and 480 Mbit/s
- Supported voltages: Full range from 1.0V to 3.0V
- Can be connected to any embedded link using flying leads
Embedded Memory
- 1 GByte of FIFO memory
- Analyzed data is stored in a highly optimized format
- Analyzed data is downloaded in real time through USB 2.0 High-speed connection
Front-panel Indicators
- Power: analyzer powered on
- Activity: traffic detected
- Trigger: trigger event detected
Connectors
- Link Under Test: USB 1.0, 1.1 and 2.0, OTG and IC-USB, all speeds supported
- Computer: USB 2.0 High-speed
- Auxiliary Equipment: Supports connection of the Trigger board or other
extension boards
Power Supply
- No external power supply needed (USB bus powered)
- 500 mA during normal operation
- 500 μA when suspended
Enclosure
- 150 x 120 x 65 mm (5.9 x 4.7 x 2.5'')
- 850 g (1.9 lbs)
Hardware Upgrade
- The decoding engine is automatically updated with each software release
(no user intervention required)
Product Warranty
Minimum Requirements
- Pentium 4, 1 GHz or compatible processor
- 512 MBytes of RAM
- 1024 x 768 display resolution with at least 256 colors
- USB 2.0 host controller
- Windows® 2000 Service Pack 4 or higher, Windows® XP
Service Pack 1 or higher
Ellisys reserves the right to change the features and specifications of the product without notice.
|
