Ellisys Download | Purchase | Contact | About | Jobs      
Protocol Analyzers
USB Explorer 260 (USB 2.0)
  Home
  Screenshots
  Datasheet
  Features chart
  Downloads
  FAQ
  Purchase
   
Quick Links
  Datasheet
  Analyzer Software
  Generator Software
  Compliance Software
  Getting Started Guide
  Analyzer Manual
  Generator Manual
   
Related Products
  Type-C Tracker (Type-C + PD)
  USB Explorer 350 (10G + PD)
  USB Explorer 280 (5G)
  USB Explorer 200 (USB 2.0)
   

Ellisys USB Explorer 260 - Technical Data

Download the datasheet »

Specifications

Analyzer Characteristics

  • Supported specifications: USB 1.0, 1.1, 2.0, OTG and IC-USB
  • Supported link speeds: 1.5, 12 and 480 Mbit/s with automatic discovery
  • Timestamp accuracy: 16.67 ns precision
  • Low-level errors: detection of bit-stuffing, CRC-5 and CRC-16 errors
  • Bus states: detection and measurement of Reset, Suspend, Keep Alive and High-Speed Handshake states

Generator Characteristics

  • Supported specifications: USB 1.0, 1.1, 2.0, OTG and IC-USB
  • Supported link speeds: 1.5, 12 and 480 Mbit/s
  • Supported modes: host, device and inline error injection
  • Timing accuracy: 16.67 ns precision

InterChip USB Probe Characteristics (sold separately)

  • Supported speeds: 1.5, 12 and 480 Mbit/s
  • Supported voltages: Full range from 1.0V to 3.0V
  • Can be connected to any embedded link using flying leads

Embedded Memory

  • 1 GByte of FIFO memory
  • Analyzed data is stored in a highly optimized format
  • Analyzed data is downloaded in real time through USB 2.0 High-speed connection

Front-panel Indicators

  • Power: analyzer powered on
  • Activity: traffic detected
  • Trigger: trigger event detected

Connectors

  • Link Under Test: USB 1.0, 1.1 and 2.0, OTG and IC-USB, all speeds supported
  • Computer: USB 2.0 High-speed
  • Auxiliary Equipment: Supports connection of the Trigger board or other extension boards

Power Supply

  • No external power supply needed (USB bus powered)
  • 500 mA during normal operation
  • 500 μA when suspended

Enclosure

  • 150 x 120 x 65 mm (5.9 x 4.7 x 2.5'')
  • 850 g (1.9 lbs)

Hardware Upgrade

  • The decoding engine is automatically updated with each software release (no user intervention required)

Product Warranty

  • Two years warranty

Minimum Requirements

  • Pentium 4, 1 GHz or compatible processor
  • 512 MBytes of RAM
  • 1024 x 768 display resolution with at least 256 colors
  • USB 2.0 host controller
  • Windows® 2000 Service Pack 4 or higher, Windows® XP Service Pack 1 or higher
  • Internet Explorer 5.0 or higher

Ellisys reserves the right to change the features and specifications of the product without notice.

 ©  2024  Ellisys. All rights reserved - Terms of Use - Privacy Statement - Write to the webmaster